Thursday, February 23, 2012

Will You Be Remembered Or Forgotten?

Don Erbin, Jr. is the Fire Chief of Kuhl Hose Company, Greene Township, Erie, PA. Don and I have known each other for over a decade. My parents don't live too far from him, and when I visit them, I always work in a visit or two with Don while I am there. I am honored to have been allowed to, over the years, partake in training with Kuhl Hose Company, as an attendee and as a trainer. I even have a few different Kuhl Hose Company shirts that I proudly wear around here!

I have used him as a vent, as a sounding board, and just shot the shit in general with him. He has also used me as a vent and sounding board over the years. My only regret in our relationship is that we live 900 +/- miles apart, and I cannot serve with him as a member of KHC.

Recently, there have been several deaths in the fire service community in Erie County, PA, including two LODDs. It hits on a personal level for me, in part because of my friendship with Don, and in part because my parents live there too, and my dad is still an active member of the Corry Fire Department - Standford Hose Company. When news from Erie County hits the wires, I pay close attention.

Don wrote a nice piece up, and shared it with me this morning. I asked him for permission to publish it on An Ordinary Fireman, and he graciously has allowed.

So, with no further adeiu, Will You Be Remembered or Forgotten?

--------



Will You Be Remembered -
Or Forgotten?
Don Erbin Jr. 23-Feb-2012


Fire Chief Don Erbin, Jr. Kuhl Hose Company, Greene Township, Erie, PA


Recent personal exposure and involvement with several line of duty deaths, and many other firefighters who have passed after countless hours and years of fire service dedication I’ve thought a lot about how will you or I be remembered? Will we be remembered, or will we be quickly forgotten.

We teach weekly fire or EMS training and can name several case studies or refer to several different NIOSH report. Quickly someone’s name or agency gets mentioned with positives, negatives and suggestions. We’ve remembered these firefighters/departments most often because of the things that happened. We learn and teach from these incidents in the hopes of not having a repeat occurrence of events. I can also mention names of those who are well published; are YouTube featured, or have a BLOG or web site stating the latest and greatest fire service ideas and opinions and they are remembered for various reasons.



What about you? How will you be remembered or will you be forgotten?

Let’s first start with your own department. Where do you stand? Are you someone who has earned your place in the rank and file? Have you earned your place on the apparatus? Do you have the training and education to keep yourself from harm’s way as much as we can in our job? Do you demand respect and so called rights of the fire service just because you signed your name once?

Maybe you will be remembered as the knucklehead who drove 85 mph to an outside odor of smoke when you’re SOG states that this is a non-emergency response, but because it’s always been done that way you tote the “TRADITION” banner. There is always the possibility you will be remembered as that guy who thrives on drama and dissention rather than taking the time to listen to other opinions or ideas and agreeing to disagree sometimes.

A better option is to hope you will be remembered as someone that has put in countless hours training, educating yourself and others, knows lots but remembers there is always room for improvement, has humility, and is a friend that some of our brothers and sisters sometime need.

Will you be remembered as a true fire service leader? No rank required. A leader is one who leads or guides. Will you lead and guide or be remembered as that guy who yells and barks orders from a book or manual rather than leading and teaching as you go.

How will you look to others outside your agency? Don’t act or think the world isn’t all about you or I. Brother firefighters know each other and talk. If you’re well known it’s more likely not for being a good leader or firefighter. What have you done? Do you even know what you’ve done? Maybe not the case but bad news travels much faster than good news.

Will you be remembered because you and your crew risked a lot and saved a lot? Did you save grandma and the baby? Did you make a good stop on a quickly advancing fire because of coordinated efforts of hose line deployment, ventilation and search teams? You’re training counts.

Our job as firefighters is dangerous most days and we have safety haters in our profession. I hope for you and your family that you’re not remembered because of something dumb that you or someone else has done because of lack of training, knowledge or skill. Read LODI or LODD reports and you can learn a lot.
So how would I like to be remembered you might ask?

Well I would like to be remembered as a leader not just by my own department, but abroad. I want to be someone who leads his troops, not by demanding things that I won’t do myself, but as someone who is right there with them no matter the situation. As General George Patton once said “No good decision was made from a swivel chair.”

I want to be remembered as a knowledgeable firefighter, friend and mentor, someone with humility who gives praise to others that deserve it rather than trying to take it for myself.
So where will you be?

Possibly you will be forgotten in a few months, weeks, or a year? Have you made an impact on your department, the fire service, your community? Have you accomplished things that will make a name for you and your agency that show your commitment? Maybe you will just be another face that came and went and a few months later no one can even remember your name.
Remembered or forgotten, you decide?






Tuesday, February 7, 2012

Tango Mike Mike

Ok, so this isn't firefighting related, and yet I think it can be, as an example of true heroism. There are some folks in the fire service who expound "We don't need any dead heros." I agree, to a point. But, we accepted the responsibility when we applied.

Here is a fine example of what it is to be a hero.
Tango Mike Mike

Sunday, February 5, 2012

Sprinkler System Success Story - Olathe Kansas - 02/05/2012 @ 1030hrs

GOOD THAT THE SPRINKLER SYSTEM WORKED AS DESIGNED! BRAVO!

CLICK HERE FOR NEWS REPORT

No injuries. Smoke alarm worked. Sprinkler worked. $2000 damage.

To all those that oppose sprinkler legislation, THIS IS PROOF THEY WORK! FACT - be it in a retirement community, hospital, nursing home, apartment/condo complex, hotel/motel, individual homes, stores, shopping centers, WHATEVER - a properly designed and maintained sprinkler system minimizes fire destruction and more importantly SAVES LIVES!!!!

Saturday, February 4, 2012

A Good Day At Work

This morning around 0300 we handled a fire at local business; it was in a big "box store" type building. Came in as an alarm, also as a burglar alarm, police en route.

As we arrived, police officers on scene walk up to us reporting smoke inside. We drove a 360 and saw smoke through a couple windows, nothing heavy, looked like fog. Stopped at the truck entrance and got out. The captain decided this is where we're making entry.

The FF grabbed a halligan bar, and I got my Lil' Rex (as found HERE ). Door is a power sliding door, aluminum frame, with glass, typical of many commercial doors. It has a mortise lock, with an extended cylinder that has a protective sleeve. The captain called for a K-Tool, but, as it turns out, that wouldn't have worked, as the cylinder sticks out too far. However, locks like this are exactly what the Lil' Rex is for!

I used the halligan bar to tamp the Lil' Rex over the lock cylinder. Once it started to bite, I then let go and gave it a few good whacks with the halligan bar. Then, I put the spike in, pried up, and POOF! the cylinder popped out. Then I used the end of the key tool to trip the lock, thus unlocking the door. Total damage caused by entry ops: one mortise lock assembly. Not much compared to a door.

(Imho, one inherent problem with the Lil' Rex is the adjunct tool design - you insert the spike of a halligan bar to pry. Works great as long as you can pry up (or whatever direction you tamped the tool into the lock), but sometimes a little side to side motion is needed to help loosen the lock cylinder. I have seen pictures and videos of modified Lil' Rex tools where they remove the spike sleeve and weld on a slot for the adze, like what it's on the K-Tool and R-Tool. I have found that if you really whack the Lil' Rex in place, like I did tonight, this helps it get a better, tighter, more secure bite on the lock cylinder, and reduces the need for side to side rocking. However, it means you will likely need another tool to remove the lock cylinder out of the Lil' Rex's teeth!)

After gaining entry, I was sent to hook the pumper into the sprinkler system, so that's what I did. It's around back. I spotted close to the plug, hand jacked a section of 5" to the sprinkler connection, hooked it to the discharge, flushed the plug, hooked up a Jesus line (that's what we call a short section, not sure of the origin), turned on the hydrant, and radioed command I'm ready to support the sprinkler system on his order. Command then said we won't need the sprinklers pumped, so I started breaking down.

Ladder 1 came back to help, which was nice. I was hustling, five inch is heavy, and the hydrant was super sticky, & I was a touch winded. Once we were done I pulled around front again and joined my crew inside.

The fire itself was odd. There was an apparent power failure believer to be lightning related, which kicked on the generator. It appears the voltage spike caused some of the low-voltage components in the fire/security alarm system (of all things!) to overheat and ignite.

Fire damaged maybe two square feet of area (the guys used a can to put it out) but did what I personally would estimate as thousands in damage to their alarm system, and maybe more.

Indirect costs will include lost business, repair costs, plus the risk of gremlins - what else was damaged? Hard telling until it's found, ya know? My guess is they'll reopen in a few days.

We ran a CO call earlier in the shift that at first was thought to be a low battery. Nope. It was real. We were in masks for an hour there. Evacuated all four of the building's units too. Cracked heat exchanger.

I like days like this, where we make a difference, and prevent bad headlines like "Four Families Killed by Carbon Monoxide" & "Fire Leaves 150 Jobless", ya know?

Thanks for reading.

Stay safe, and God bless!

Ken

Tuesday, January 24, 2012

Simple Ladder Trick

This one will be short (seriously!).

Since I was a rookie, I've always been taught, with extension ladders, we carry it to position, untie the halyard, extend the fly, ensure the dawgs are secure, and re-tie the halyard. THEN we could climb it, provided it is at the proper climbing angle, footed securely, etc.

The whole un-tying and re-tying the ladder has bothered me ever since. It always seemed like a waste of time. That's because it is. What do we do when we arrive at a working house fire at 2AM, and a mother is SCREAMING that her child is IN THAT ROOM RIGHT THERE! If you have never heard screams such as this, consider yourself lucky.

So now the pressure is on. What do we do? Grab the ladder, carry it to position, walk it up, untie the damned halyard, extend the fly... do we re-tie it with mom screaming right there? I don't...

I've also not bothered tying it again on other, more routine (if there is such a thing) fires over my career, and gotten ass-chewings for it each time. "It's a trip hazard." Ok, why are we walking under ladders? We're not supposed to, but we all know it happens. 

There has got to be a better way.

I have thought this for years. YEARS! For over 23 years now. I'd asked others, especially the senior, respected members, and do you know the two most common answer I've gotten? I'll bet you do. "We've always done it that way" & "It's in the IFSTA manual".

We've always done it that way... There are good and bad points about that. When I am told that, I want to know WHY. Have other methods been tried, & did they work? Why or why not? I feel the "we've always done it that way" CAN have merit, IF it's backed up. I hate it as an absolute blanket statement.

It's in the IFSTA manual... Yeah, and so is a lot of other stuff. IFSTA may have printed the materials, but they don't set the standards. NFPA does. There are other companies out there who also sell training manuals. I feel it is high-time that we as a fire service let IFSTA know this. I'd go on about that, but I'm digressing from this blog's point.

Yes, it is in the IFSTA manual. I have seen it in the 2nd, 3rd, and 4th editions. I happen to have a 4th edition here in front of me as I am writing this - on page 300, second column, second paragraph. It explains when and how to tie the halyard, and explains that it "prevents the fly from slipping and prevents anyone from tripping on the rope". I can't argue the part about tripping. I've heard it my whole career.

Can someone explain to me, just how is the halyard going to prevent the fly section from slipping? (By slipping, I am taking it to mean retracting on it's own.) Aren't we supposed to be sure the dawgs are set? It's basic ladder use. It's also easy to do. (Dawgs are ladder locks for my non-fire service friends reading this.) If the dawgs are properly set, the ladder isn't going to retract. If the dawgs fail, I think it's going to take more than a halyard to prevent catastrophe.

Ok... so fast forward through that boring stuff into present day. A few weeks ago, I saw a video of a firefighter in the Washington, D.C. area doing a VES operation. He carried the ladder to the window, set it up, extended it, set it, and climbed up, doing the drill. What caught my attention is that he didn't fuss with un-tying and re-tying the halyard. He just pulled it and extended the fly, set the locks, and went to work. 

I watched it several times. Not so much about the VES part of the drill, rather, the halyard.

Then it hit me: That company secured the end of the halyard around the bottom rung of the base section and to the anchor on the bottom rung of the fly section!

So, last shift, I pulled our extension ladder out (I'm on an engine company now, and we only have one 24ft extension ladder) and messed around some. It turns out that the halyard was the PERFECT length to do exactly as above. So, I secured the rope, and tried it out while still on the bay floor, and it worked perfectly. I went and got the other members of the company and showed them. They all said it seems good, but, agreeing with my thoughts, let's take it outside and try it on the wall. So we did. It worked like a charm!


Here you can see the halyard ran under the bottom rung on the base section.


Here, you can see the halyard secured to its anchor.

The best way to build up efficiency is to - wait for it - TRAIN! TRAIN! TRAIN!

Stay safe.
Thanks for reading. God bless.

Ken